We’ve got you Covered

The FieldSENSE 2.0 is the 2nd generation in Personal RF Monitors specifically designed for protecting personnel working near broadcast and telecommunications transmitting antennas up to 6 GHz from EMF overexposure.

So affordable, every worker can carry one

Frequency range: 50 MHz – 6 GHz

Broad spectrum coverage

Covers all typical television and FM radio broadcast services right up to mid bang 5G systems below 6 GHz.

E & H fields measured

In order to accurately assess a given exposure situation, both H and E fields are measured.

Shaped response

The exposure limits, such as the FCC (NCRP), SC6 or ICNIRP are ALL shaped over frequency and as such PPE must also have a shaped probe response to accurately measure in accordance with it.


The FieldSENSE 2.0 has a total of 6 orthogonal E & H field probes to ensure that the combination of all sources of radiation from all angles are correctly measured and assessed in accordance with the safety limits.

Data logging

The FieldSENSE 2.0 includes an advanced E & H field data logger which records all your measurements so that you can access them easily over a USB connection to your PC in the office. You can even view data real-time over the USB connection with the PC application.

Designed for tower climbers – it could save your life

Fall-detect & alarm

Inbuilt fall detection system will sound an alarm should you accidentally fall. This will attract the attention of colleagues to immediately initiate rescue actions.

"Grippy" design

Special bevelled design to fit tightly into your hand with a textured soft elastomer surface and grip ridges ensuring you don’t have any fumble moments up in the air.

Harness fastening

Special strap & buckle system for fastening your device to your climbers harness ensures easy access to it. Specifically designed to keep it away from areas which are either heavily utilised or impede easy climbing.

Wrist strap

Easily adjustable wrist strap ensures you never accidentally drop your device when working at heights.


Rugged IP64 enclosure

The FieldSENSE 2.0 has a special co-moulded enclosure with a base layer of polycarbonate which is typically used in riot shields, and an outer elastomer layer made of TPU which is designed for hard wearing environments.

Zipper case with moulded foam insert

Shipped in a heavy duty zipper case with a custom moulded insert makes for even further protection of your device.

More Specs

Voice Notes

Match data with quick voice notes
Record a serial number

Tripod attachment

Remote monitoring
Attach extension pole

Uses AAA batteries

Readily available AAA (LR03) batteries
6-12 Months battery life (medium usage)

Water resistant

Withstand heavy weather conditions

User interface

Bright LEDS, visible in sunlight
Auto power off after 8 hours of inactivity.
Single button operation
Operate with glove
Loud buzzer

Find a Distributor

Alphawave Mobile Network Products

3 Meson Street, Technopark

Stellenbosch, 7600

South Africa


+27 21 880 1880


Direct Suppliers

Please give us a call on (312) 260-6055 or visit any of our direct suppliers below.

(312) 260-6055

Direct Suppliers

Please give us a call on 014 62 65 06 20 or visit any of our direct suppliers below.

014 62 65 06 20