Designed for rooftop workers and tower climbers’ RF safety
It works as hard as you.

fieldSENSE protects workers against RF over exposure

IT WORKS AS HARD AS YOU

The only RF monitor you will ever need

Coverage: 50 MHz to 60 GHz

The fieldSENSE now in its 3rd generation has a proven track record of ensuring on-site employee safety. fieldSENSE60 is specifically designed with the RF climber in mind – whether working in the nearfield of a broadcast system or in the far-field of a 5G system, exposure is correctly assessed

and a warning is sounded, should the levels approach and exceed the occupational health & safety limits. The device can be attached to a special harness-attachment mechanism to ensure it cannot be dropped, yet still within hearing range of the buzzer in the event of a warning.

RF Tower
Climbers

fieldSENSE’s is designed with the climber in mind. Trusted by 1000s of RF workers world wide.

 

HVAC & rooftop technicians

Rooftop hosted base stations place those working there at risk of RF over-exposure. FieldSENSE has you covered.

Bucket truck
workers

Utilities, small cell and street lighting all call for bucket truck access, all potentially placing you in line with transmitting antennas.

fieldSENSE 60

Frequency range: Broadcast FM to 60 GHz

One major improvement with the fieldSENSE60 is the upgraded frequency range which now includes coverage from broadcast FM to millimeter wave 5G systems of up to 60 GHz. The fieldSENSE60 architecture is specifically designed to ensure safety from RF exposure whether in the near 

field of the antenna such as around FM broadcast systems or the far-field around higher-frequency systems right up to 5G and beyond.

RF Monitor with a proven track record

Designed to Keep You Safe

The fieldSENSE60 is the RF monitor with a proven track record of ensuring on-site employee safety. fieldSENSE60 is specifically designed with the RF climber in mind – whether working in the nearfield of a broadcast system or in the far-field of a 5G system, exposure is correctly assessed and a warning is sounded, should the levels approach and exceed the occupational limits. The device can be attached to a special harness-attachment mechanism to ensure it cannot be dropped, yet still within hearing range of the buzzer in the event of a warning.

What comes in the box?

The fieldSENSE60 comes in a compact, zipper case with a custom-moulded insert that ensures device protection during transit or in storage. Included in the case is the fieldSENSE60 device, its harness attachment mechanisms, the clip mechanism and the rubber strap mechanism.  It also contains the coiled lanyard system. There is the USB cable which you need for accessing logs on the device and then of course a comprehensive user manual addressing all these points.

Built for Climbers

The fieldSENSE60 harness attachment mechanism has been completely redesigned to include a coiled lanyard system. The lanyard system facilitates the smooth handling of the device during operations while still remaining visible and audible. If at any time the device is dropped, there is no risk of it falling off the site. The device furthermore has a fall detection system that triggers an alarm in the event of a climber falling or getting knocked unconscious so avoiding the risks of suspension trauma.

Data Logging & Voice Notes

The fieldSENSE60 automatically logs all data, which means from the moment it is switched on, it logs data every second. The device has a voice-note option in the event that a climber is on-site and needs to record a voice note. It only requires a simple and quick double-tap to switch to audio mode. These voice notes can be downloaded together with the data logs using a USB connection and the software available for download. 

fieldSENSE 2.0 

Frequency range: 50 MHz – 6 GHz

Broad spectrum coverage

Covers all typical television and FM radio broadcast services right up to mid bang 5G systems below 6 GHz.

E & H fields measured

In order to accurately assess a given exposure situation, both H and E fields are measured.

Shaped response

The exposure limits, such as the FCC (NCRP), SC6 or ICNIRP are ALL shaped over frequency and as such PPE must also have a shaped probe response to accurately measure in accordance with it.

Isotropic

The FieldSENSE 2.0 has a total of 6 orthogonal E & H field probes to ensure that the combination of all sources of radiation from all angles are correctly measured and assessed in accordance with the safety limits.

Designed for tower climbers – it could save your life

Fall-detect & alarm

Inbuilt fall detection system will sound an alarm should you accidentally fall. This will attract the attention of colleagues to immediately initiate rescue actions.

"Grippy" design

Special bevelled design to fit tightly into your hand with a textured soft elastomer surface and grip ridges ensuring you don’t have any fumble moments up in the air.

Robust, gugged IP64 enclosure

The FieldSENSE 2.0 has a special co-moulded enclosure with a base layer of polycarbonate which is typically used in riot shields, and an outer elastomer layer made of TPU which is designed for hard wearing environments.

Harness fastening

Special strap & buckle system for fastening your device to your climbers harness ensures easy access to it. Specifically designed to keep it away from areas which are either heavily utilised or impede easy climbing.

Wrist strap

Easily adjustable wrist strap ensures you never accidentally drop your device when working at heights.

Zipper case with moulded foam insert

Shipped in a heavy duty zipper case with a custom moulded insert makes for even further protection of your device.

So affordable, every worker can carry one

Find a Distributor

Encontre um distribuidor

Finden Sie einen Händler

Trouver un distributeur

판매 대리점 찾기

Zoek een distributeur

Trova un distributore

                Alphawave Mobile Network Products

                3 Meson Street, Technopark

                Stellenbosch, 7600

                South Africa

                +27 21 880 1880

                HAR & CA

                Via G. Falcone, 1/3

                20873 Cavenago Brianza (MB)

                Italy

                Tel. +39 02.9533.9880

                 

                Datasonic

                R. Quintino Bocaiúva, 339 - Palmeira,

                Campina Grande - PB, 58401-170

                Brasil

                Tel. +55 83 3321-6143

                Mob. +55 83 99971 7274

                 

                Country:US

                Alphawave Mobile Network Products (South Korea)

                +82 2 2006 6790

                info@fieldsense.com

                Alphawave Mobile Network Products

                3 Meson Street, Technopark

                Stellenbosch, 7600

                South Africa

                +27 21 880 1880

                info@fieldsense.com

                fieldSENSE GMBH

                fieldSENSE c/o Codeks GmbH

                Moritzstrasse 14

                42115 Wuppertal

                Deutschland

                +49 69 66 55 41 71

                Lillybelle

                92 Cours Lafayette

                CS 53515

                69003 Lyon

                France

                +33 970 440 419

                Direct Suppliers

                Please give us a call on (312) 260-6055 or visit any of our direct suppliers below.

                (312) 260-6055

                Direct Suppliers

                Please give us a call on 014 62 65 06 20 or visit any of our direct suppliers below.

                014 62 65 06 20